Advantages Of Stainless Steel Pattern Plate

The specification of the pattern plate

In fact, its specifications are mainly composed of thickness and width. It is understood that its thickness is generally between 1.5 ~ 9.75mm, and the commonly used is 2 ~ 7.75mm; The width is generally between 1010 and 1500mm, and there are two common 1250mm and 1500mm.

In some calculated values, there is often a little error, so the actual product of the pattern plate specifications will be biased, so here is to see what its allowable deviation value is.

For example, in the thickness of 2.5-3.5mm, the allowable and standard deviation up and down 0.3mm; In the thickness of 4mm and 4.5mm, allow up and down deviation of 0.4mm; In the thickness of 5mm and 5.5mm, allow upward deviation of 0.4mm and downward deviation of 0.5mm; In the thickness of 6mm, allow upward deviation of 0.5mm, downward deviation of 0.6mm.

What are the advantages of stainless steel patterned plate

Stainless steel patterned plate: its advantages are visually beautiful, excellent quality, easy to clean, maintenance-free, resistant to impact, pressure, scratch and no fingerprints. According to scientific tests, transmission efficiency, scratch resistance, pressure resistance performance is better than ordinary stainless steel plate, can reduce the friction of 30%-70%, significantly increase the efficiency of the slip surface, and correspondingly reduce surface wear, the same can also extend the service life of machinery and equipment!

Stainless steel patterned plate pipe rolling are generally and refining furnace supporting facilities, there is strict management of the composition of the steel and temperature; in order to avoid secondary air oxidation of the steel, rolling steel processing process provides for the use of no air oxidation maintenance pouring; the steel ladle, positive middle ladle, sliding water mouth, immersion water parts and other refractory insulation material regulations harsh.

About the specifications of the pattern plate, through the introduction above, we can understand that the specifications of the Chinese version is not the, but there are many kinds of, mainly by the thickness and width of the composition. Commonly used pattern plate, its thickness is between 1.5 ~ 9.75mm, and the width is between 1010 ~ 1500mm.