UNS S31803 Duplex Stainless Steel Round Bar-manufacture,factory,supplier from China

S31803 Plate S31803 Plate  is a standard duplex grade duplex stainless steel alloy. It has the microstructure of equal austenite to ferrite ratio. SA 240 UNS S31803 Sheet is a combination of reliable mechanical stability, ductility and good corrosion resistance properties.

Duplex Steel S31803 Round Bars have high-stress corrosion cracking resistance in halide containing environments and outstanding resistance to erosion corrosion and corrosion fatigue.

s31803 Duplex stainless steel is a kind of  Medium alloy stainless steel,it's PREN value is 32-33, and its corrosion resistance is between AISI 316L and 6%Mo+N austenitic stainless steel.Duplex stainless steel has the characteristics of both austenitic stainless steel and ferritic stainless steel because it has austenite + ferrite dual-phase structure, and the content of the two phase structures is basically the same. The yield strength can reach 400Mpa ~ 550MPa, which is twice that of ordinary austenitic stainless steel.

Being an expert in manufacturer, suppliers and stockists 329 Duplex Stainless Steel Round Bar. Ensure the best quality, which is in compliance with international quality standards as our in-house manufacturer 329 Duplex Stainless Steel Round Bar unit is equipped with advanced machinery to check the quality. The primary feature of this 329 Duplex Stainless Steel Round Bar is it has very longer service life duration with operational convenience and safety.

Introduction of Stainless steel round barPopular for its corrosion resistance, stainless steel rod is used in a wide range of applications including the construction of building foundations, bridges, and marine environments.We have black bright surface, and different materials such as 201 304 304L 316 316L 2205 2507 430 420 410 for you to choose.StandardASTM A479,ASTM A276,ASTM A484, ASTM A582, ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 

300 series stainless steel round rod :316 stainless steel round rod, 304L stainless steel round rod, 304 stainless steel round rod, 310 stainless steel round rod, 303 stainless steel round rod, 302 stainless steel round rod, 301 stainless steel round rod,200 series stainless steel round rod :202 stainless steel round rod, 201 stainless steel round rod,400 series stainless steel round bar :410 stainless steel round bar, 420 stainless steel round bar, 430 stainless steel round bar300 series stainless steel round rod details:316L stainless steel round rod :316 stainless steel contains molybdenum

Product SpecificationThickness/Diameter>4 inchSingle Piece Length3 meter, 6 meterMaterialStainless SteelShapeRoundDiameter6 to 400 mmLength1 ~ 8 metersProduct DescriptionWe stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions.

2507 (UNS S32750) duplex stainless steel has strong strength and corrosion resistance, which is mainly used in chemical processing, petrochemical industry and subsea equipment. It has strong chloride corrosion resistance, high thermal conductivity and low coefficient of thermal expansion. The high content of chromium, molybdenum and nitrogen makes it highly resistant to patchy, crevice and general corrosion.

S355 Duplex Stainless Steel Round Bar is often used in the most demanding environments such as the offshore industry.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

ASTM A790 refers to stainless steel seamless and welded pipes (UNS S31803, UNS S32205, UNS S32750, UNS S32760). These tubes can be easily cut and molded by bending, stretching, extrusion, and other common procedures. Consideration should be given to its high intensity and the resulting larger springbok.

SUS 312L UNS S31254 Duplex SS Sheet Stainless Steel Coils for SaleProducts Description         Product Namestainless steel coilsMaterial（DIN）1.4301/1.4306/1.4541/1.4401/1.4404/1.4571/1.4539/1.4410/1.4833/1.4845Thickness0.3-100mmWidth600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcSurface2B, BA, NO.4, Mirror, Hairline, etcStandardJIS, AISI, ASTM, GB, DIN, EN, AISI, ASTM, DIN, EN, GB, JISGrade201/304/304L/321/316/316L/310S/904L/309S/316Ti/317L/2205/2507, etc.TechniqueCold Rolled,Hot RolledCertific

We make use of hundred percent pure raw materials for manufacturing Duplex S31803 Coils that results in the production of high quality of goods. Duplex 31803 Coils has a huge number of applications in various industries. These coils are used in the manufacturing of the piping and tubing in the oils and gas exploration industries and are also used in the manufacturing of food processing equipment.

super duplex 2507 round bar is an alloy which has been designed for applications that demand exceptional tensile strength and superior resistance to corrosion as well.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

Specification of stainless steel rod: From 1.0mm to 250mm size (diameter, side length, thickness or opposite side distance) not more than 250mm hot rolled and forged stainless steel rod.Stainless steel rod material :304, 304L, 321, 316, 316L, 310S, 630, 1Cr13, 2Cr13, 3Cr13, 1Cr17Ni2, duplex steel, antibacterial steel and other materials!TechniqueForged/Hot Rolled/Cold Drawn/PeeledCategory1.Round bar1)Hot rolled black bar: (5-400)x6000mm or according to your requirement.2)Acid round bar: (5-400)x6000mm or according to your requirement.3)Cold drawn bright bar: (1-20)x6000mm or according to your

Duplex Steel UNS S32205 Round Bars have a long service life and low maintenance cost and hence can be used in various industrial applications like oil and gas exploration and processing equipment, chemical and petrochemical processing equipment, high chloride and marine environments, power generation, specialty chemicals, gas processing, seawater equipment, pulp and paper digesters, etc.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430,

304 Stainless Steel Round Bar304 Stainless Steel Round Bar is an gorgeous candidate for most processing strategies as properly as each indoor and outside applications. This product, designed for shut tolerances, has a semi-smooth, stupid gray end and sharp described edges with correct dimensions at some point of length. 304 Stainless Steel Round Bar is a excessive energy cloth with tremendous corrosion resistance making it best for shelves, brackets, bracing, sculptures, and different architectural uses.

Well known for its high impact strength, UNS S32760 displays no ductile-brittle transition but only a slight reduction in impact energy as temperature decreases.

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

S32760 Super Duplex Forged Bar can be produced by following specification standard ASTM A276.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

Chemical compositionCarbon (C) : 0.15 or lessSilicon (Si) : 1.00 or lessManganese (Mn) : 5.5 ~ 7.50Chromium (Cr) : 16.0 ~ 18.0Nitrogen (N) : 0.25 or lessPhosphorus (P) : 0.060 or lessSulfur (S) : 0.030 or lessNickel (Ni) : 3.5 to 5.5See the ASTM A666TechniqueForged/Hot Rolled/Cold Drawn/PeeledCategory1.Round bar1)Hot rolled black bar: (5-400)x6000mm or according to your requirement.2)Acid round bar: (5-400)x6000mm or according to your requirement.3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement.4)Polishing round bar: (5-400)x6000mm or according to your requests.2.

Alloy K-500 (UNS N05500) is a nickel-copper alloy.

Stainless Steel Round Tube Material304:0cr18ni9, 0cr17ni8201:1cr17mn6ni5n,1cr13mn9ni1n316:0cr17ni12 or as customer's requestSize(round pipe)9.5, 12.7, 15.9, 17, 18, 19.1, 20, 21, 22.2, 23, 25.4, 28, 318, 35,60, 63.5, 73, 76.2, 88.9, 101.6, 114.3, 127, 133, 159, 168, 219 mm or customizedSize (square pipe)10×10,12×12,18×18,23×23,38×38,50×50,70×70,100×100,20×10,23×10,24×12,25×13,36×23,40×20,50×20,60×15,75×45,80×60,9

SAF 2507 offers high compressive strength, impact strength, low coefficient of thermal expansion and high thermal conductivity.These characteristics are applicable to many structural and mechanical components.SAF 2507 has high impact strength and is not suitable for prolonged exposure to temperatures higher than 570°F, which may reduce toughness.2507 stainless steel composition content.GradeCMnSiPSCrMoNiN2507Min.Max.≤0.03≤1.2≤0.80≤0.035≤0.0224-263-56-80.24-0.32Chemical CompositionENASTM/UNSCNCrNiMoCOMPOMENT11.43013040.0418.18.321.4307304L0.0218.18.331.45413210.0417.39.1Ti0.2441.45503470.0517.5

UNS S32760 is able to compete strongly with the 6% molybdenum “super austenitic” grades in some applications, as it has fewer amounts of Mo and Ni which drive up the base cost of the material. Although, 32760 has lower amounts when compared to “6% Moly” grades it still has higher contents of Cr, Ni, and Mo when referring to other alloys, these elements improve the intergranular and pitting corrosion resistance of the material.