Socket Weld Pipe Flange-manufacture,factory,supplier from China

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

Seawater corrosion resistant materials, and widely used in Marine engineering. However, in practical engineering application, the stainless steel connection, especially the welding area, often appears various corrosion damage, resulting in a great loss. Therefore, in this paper, according to the characteristics of seawater corrosion of stainless steel, the seawater corrosion and anticorrosion mechanism of its weld site were comprehensively analyzed and studied.

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.

Structural features:Threaded flanges manufactured in accordance with ASME B16.5 are similar to sliding flanges, but the holes shall have tapered pipe threads in accordance with ASME b1.20.1. The thread shall be concentric with the axis of the flange opening, and the alignment deviation (perpendicular to the flange face) shall not exceed 5mm per meter. Threaded flanges are NPs 1 / 2 to NPs 24 in size and pressure classes are 150, 300, 400, 600 and 900. The sizes of class 1500 and 2500 are NPs 1 / 2 to NPs 2 - 1 / 2.Class 150 threaded flange has no counterbore.

Material grade: ER70S-6Standard: ASMEIt belongs to copper-plated low-alloy steel gas shielded welding wire. It uses C02 or argon-rich shielding gas for welding. It has excellent welding process performance, stable arc combustion, less spatter, beautiful weld shape, and low sensitivity to weld metal pores. The position welding process is good.

Features of Flat Welding FlangesWhen welding flat welding flanges, only one side welding is required, and there is no need to weld the inner port of the pipe and flange connection. The welding installation of butt welding flanges requires double-sided welding of the flanges. Therefore, flat welding flanges are generally used for low and medium pressure pipelines, and butt welding flanges are used for the connection of medium and high pressure pipelines. Butt welding flanges are generally at least PN2.5MPa. Butt welding is used to reduce stress concentration.

The appearance of the stamping elbow is fixed. Of course, the appearance of the general stamping elbow is based on the different knowledge of the steel pipe. Therefore, in order to ensure the appearance of the stamping elbow, usually after the steel pipe comes in , If it has not been washed by the rain in the yard, then the stamping elbow is pushed by high temperature, and the appearance of the stamping elbow is generally blue. Of course, if it is washed by the rain, we are heating it through high temperature. , the surface color of the heated stamping elbow is red.

They’re the most commonly used carbon steel pipe types in industry today, and they’re very similar.But while the differences between A106 and A53 are few, they matter a great deal in terms of when and where each is specified.To ensure you purchase the correct pipe and receive it quickly, two things are a must: A basic understanding of seamless and welded seam pipe, and providing detailed specs.A106 vs. A53 — Welded vs.

Stainless Steel 446 Pipe SpecificationStandardASTM A312 / A358, ASME SA312 / A358SpecificationDIN, ASTM, BS and all International StandardsSS Pipe Size1/2" to 16"NBERW Pipe Size1/2" to 24"NBEFW Pipe Size6"NB to 100"NBTypeSeamless, ERW, Welded, Fabricated, LSAW.FormRound, Square, Rectangular, Hydraulic etc.LengthSingle Random, Double Random and Cut Lenght.EndPlain End, Beveled End, Threaded etc.