Size 1 - 3 Inch-manufacture,factory,supplier from China

Unit Length6 m, 12 mUnit Pipe Length3 meter, 6 meter, 9 meter, 18 meter, 12 meterSize0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, > 4 inch, Upto 24Material GradeA 106FeaturesAnealedAlloy Or NotIss AlloyCertificationAPISteel GradeA 106ColorBlackMinimum Order Quantity50 KilogramProduct DescriptionTypes of Steel PipesCARBON STEEL PIPES: Seamless/ERW Pipes - A 106 Gr.B, API 5L GR.B, ASTM A210 A1, SA 179 ETC.Specifications / FeaturesASME specifies a set of Alloy Steel pipe specifications which can be welded - Welding rod Specification is : E.8018.Standard pipe schedules are available like&n

STOCK SIZE RANGE AND SPECIFICATIONS:WELDED PRODUCTSEAMLESS PRODUCTNPS: 1/8” through 24”NPS: 1/8” through 8”Schedules: 5, 10S, 10, 30, 40S, 40, 80, 80SSchedules: 10, 40, 80, 160, XXHSpecifications: ASTM A312, ASME SA312Specifications: ASTM A312,ASME SA312Corrosion tested to MIL-P-24691/3 or A262 Practice ETypical Chemical Composition % (max values, unless noted)Weight %CMnPSSiCrNiMo316.082.00.045.0301.0016.0-18.011.0-14.02.0-3.0316L.0352.00.045.0301.0016.0-18.010.0-14.02.0-3.0Typical Mechanical PropertiesGradeTensile Ultimate/MinYield/MinElongation/MinKSIMPAKS

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

Advantages:Forming speed, high yield, can be made into a variety of cross section forms, to meet the needs of the use conditions; Cold rolling can produce large plastic deformation of steel, thus raising the yield point of steel. Hot rolling can destroy the casting structure of steel ingot, refine the grain size of steel, and eliminate the defects of microstructure, so that the microstructure of steel is compact and the mechanical properties are improved.Disadvantages:1.

304S31 & 304S15 (1.4301) A2General purpose non-magnetic stainless steel possessing good weldability, formability and general corrosion resistance.Bar-rolled edgeRod - BS970 pt 3 BSEN 10088-3Angle - BS970 pt 1 BSEN10051Square - BS970 pt 3 BSEN 10088-3Sheet - BS1449 pt 2 BSEN 10088-2 (2B surface finish)Excellent material for polishingSuitable for food and dairy processing equipment, laundry and chemical industry, process plant and tanksSpecificationsAttributeValueBrandRS PRODensity8 g/cm³Length500 mmTensile Strength520 MpaColourSilverFormSolidWidth300 mmThermal Conductivity16.2 W/m at 100°cM

How to identify the quality of stainless steel sinks?1. Thickness of water tank steel plate: The high-quality water tank adopts imported 304 stainless steel plate with a thickness of 1mm, while the ordinary low-grade water tank adopts 0.5mm-0.7mm. The method of identification can be determined from the weight and whether the surface is flat.2. Anti-noise treatment: The bottom of the high-quality sink is sprayed or glued with rubber sheets and does not fall off, which can reduce the sound caused by the impact of the water from the faucet on the bottom of the basin, and play a buffering role.3.

Specification of Stainless Steel Sheets, Plates & Coils Specifications : ASTM A240 / ASME SA240Thickness : 0.1mm to 12 mm ThkSheet/Plate Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm.Coil Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc.Coil Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc.Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching.Finish : Hot rolled (HR), Cold rolled (CR), SATIN (Met with Plasti

Precautions when installing stainless steel elbows:  1. When installing, the stainless steel elbow can be directly installed on the pipeline according to the connection method, and installed according to the position of use. Under normal circumstances, it can be installed in any position of the pipeline, but it needs to be sealed to prevent leakage and affect the normal operation of the pipeline.2. When the stainless steel elbow ball valve, globe valve and gate valve are used, they are only fully open or fully closed, and should not be used to adjust the flow to avoid sealing.3.

1, Corrosion resistance, non-flammable, non-toxic and tasteless.  2, Good wear resistance, long service life, stainless steel perforated mesh wear resistance for ordinary sieve plate 3 to 5 times, for ordinary rubber sieve plate more than 5 times.  3, The total cost is low, although the same specification (area) of stainless steel perforated plate than ordinary sieve plate high one-time investment (about 2 times), but because the life of stainless steel perforated plate is 3 to 5 times the ordinary sieve plate, and less maintenance and replacement, so the total cost is not

There are roughly five types of surfaces that can be used for stainless steel. They can be combined to produce more end products.The five species are:1. rolling surface processing2. mechanical surface processing3. chemical surface processing4. mesh surface processing and color surface processingThere are also some special surface treatments, but no matter which one is specified, theFollowing steps should be followed:1. Work with the manufacturer to agree on the required surface processing, it is better to prepare a sample as the future batch production standards.2.