s30100-manufacture,factory,supplier from China

Stainless steel is initially by British scientists Henry cabral, doing research on the improvement of weapons found and the stainless steel in which the research has a strong dirt, acid resistance, corrosion resistance, wear resistance, no radioactive environmental products in developed some stainless steel products to pop up to now and slowly instead of the other material products.From material selection to molding, the stainless steel products cast by us have gone through 33 years of process processing. The surface technology adopts stainless steel primary color mirror polishing.

304S31 & 304S15 (1.4301) A2General purpose non-magnetic stainless steel possessing good weldability, formability and general corrosion resistance.Bar-rolled edgeRod - BS970 pt 3 BSEN 10088-3Angle - BS970 pt 1 BSEN10051Square - BS970 pt 3 BSEN 10088-3Sheet - BS1449 pt 2 BSEN 10088-2 (2B surface finish)Excellent material for polishingSuitable for food and dairy processing equipment, laundry and chemical industry, process plant and tanksSpecificationsAttributeValueBrandRS PRODensity8 g/cm³Length500 mmTensile Strength520 MpaColourSilverFormSolidWidth300 mmThermal Conductivity16.2 W/m at 100°cM

Why doesn't stainless steel rustBecause of the addition of 12.5% chromium in stainless steel composition, it can make stainless steel surface generated a layer of passivation film, prevent the metal matrix is destroyed, enhance corrosion resistance, so the surface will not rust.

Application field:Like other nickel based alloys, Hastelloy C-22 is very ductile and has excellent weldability.

Application and characteristics of HastelloyPurpose:Hastelloy plate is suitable for various chemical industries containing oxidizing and reducing media. The high content of molybdenum and chromium makes the alloy resistant to chloride ion corrosion, and tungsten further improves the corrosion resistance. At the same time, C-276 Hastelloy pipe is one of the only materials that can resist the corrosion of wet chlorine, hypochlorite and chlorine dioxide solutions.

Spec ChartsType 304Hot Rolled, Annealed and PickledThickness and WidthWeight Lbs. per Sq. Ft.Weight Lbs. per LengthLength3/16 x 488.579343.1610'1/4 x 4811.16357.128'1/4 x 4811.16446.4010'5/16 x 4813.75550.0010'3/8 x 4816.50660.0010'1/2 x 4821.63865.2010'5/8 x 4826.831,073.2010'3/4 x 4832.121,284.8010'1 x 4842.671,706.8010'1 1/2 x 4863.342,533.6010'

321 stainless steel plates are part of the austenitic family of stainless steel. 321 is basically a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue. 321 can be used in applications up to 900°C where 304 is normally used up to 500°C. Grade 321 has excellent forming and welding characteristics.

304 stainless-steel is a common stainless-steel material, density of 7.93 g/cm³, the enterprise is likewise referred to as 18/8 stainless-steel.

301 stainless steel strip is a sub-stable austenitic stainless steel with a fully austenitic organization under full solid solution conditions.The austenitic stainless steel has a fully austenitic organization under full solid solution conditions.In the austenitic stainless steel, 301 is Z easy cold deformation strengthening steel, through cold deformation processing can make the steel strength, hardness, and retain sufficient plastic, toughness, plus this steel has good rust resistance in atmospheric conditions, but stainless steel micro-wire in reducing media corrosion resistance is poor, in

Basic introduction about Duranickel  and Ni-Mo、Ni-Mo-Cr HastelloyDuranickel:The nickel content of these alloys exceeds 94%. The ultrahigh nickel alloy containing 4.75% manganese is resistant to vulcanization at high temperatures. If heat treatment is carried out, Duranickel 301 will become stronger, which will cause the submicroscopic particles of Ni 3 Al and Ti to precipitate in the whole matrix. This process is called precipitation hardening. Duranikel maintains excellent spring performance at temperatures up to 600 ° F.