non-slip-manufacture,factory,supplier from China

Steel checker plate features ideal skid resistance and is widely used in non-slip places such as stair treads, entryways and truck ramps.Compared with aluminum diamond plate, steel plate can hold much heavier loads. For expanding its life expectancy, galvanized steel diamond plates are provided.Steel diamond plate specifications:Sizes: 1ft × 4ft, 2ft × 2ft, 2ft × 4ft, 4ft × 4ft, 4ft × 8ft, 5ft × 10ftThickness: 1.0mm to 5.0mmBar pattern: 1-bar, 5-bar and 2-bar

Able to deliver goods quickly Tightly packed Stainless Steel 304/316/304L/316L anti-rust oil of plate flangeItemDescriptionBasic InformationMaterial GradeWP304 , WP304L , WP304H , WP316 , WP316L , WP316Ti , WP309S , WP310S , WP321 , WP321H , WP347 , WP347H , F304 , F304L , F304H , F316 , F316L , F310S , F321 etcSize1/2" to 48" Sch 5S to XXSStandardASTM A403 etc .Process MethodForged / CastingIndustry & AdvantageApplicationa) Connect pipesAdvantagea) High technology ; good surface ; high quality etcTerms & ConditionsPrice ItemFOB , CFR , CIF or as negotiationPaymentT / T

This austenite crystalline structure is achieved by sufficient additions of the austenite stabilizing elements nickel, manganese and nitrogen. Due to their crystalline structure, austenitic steels are not hardenable by heat treatment and are essentially non-magnetic.There are two subgroups of austenitic stainless steel. 300 series stainless steels achieve their austenitic structure primarily by a nickel addition while 200 series stainless steels substitute manganese and nitrogen for nickel, though there is still a small nickel content.300 series stainless steels are the larger subgroup.

Stainless steel coil: Material: SUS201, 202, 304, 316L, 316Ti, 321, 304L, 441, 444, 436, 439, 430, 409L, 410S, 309S, 310S, 904L, 2205, 2507, etc.  Thickness: 0.3-16.0mm, width 1 meter, 1.22 meters, 1.5 meters, 1.8 meters, 2 meters, non-standard can be customized.   Stainless steel properties:As a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties;  Stamping, bending and other hot workability, no heat treatment hardening phenomenon (use temperature -196℃~800℃).  Household products (cl

Type 301 is an austenitic chromium-nickel stainless steel that is available in the annealed and cold worked conditions. In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold working.Type 301 is corrosion resistant in many environments, but the corrosion properties are less than that of 304/304L stainless steel.

ASME B16.5 SpecificationsSpecificationASME B16.5 FlangeType Of Industrial flangesBlind Flange/ Slip On Flange/ Weld Neck Flange/ Socket Weld Flanges/ RTJ Flanges/ Lap Joint Flanges/ Threaded/ Reducing FlangesFlanges Manufacturing MaterialStainless Steel, Brass, Bronze, Duplex Steel, Super Duplex, Incoloy, Alloy 20, Copper, Carbon Steel, Nickel Alloys, Tantalum, Cupro-Nickel Inconel, Monel, Titanium, Hastalloy, Alloy Steel.Type Of Pipe Flange MethodsForging/ Casting/ Rolling And CuttingANSI Flange Pressure ClassClass 150/ Class 300/ Class 400/ Class 600/ Class 600/ Class 900/ Class 1500/ Class

Stainless-steel sample plate is embossed by way of mechanical gadget on the chrome steel plate, in order that the floor of the concave and convex pattern.  Due to the splendid corrosion resistance and skid resistance of stainless steel sample plate has been used by many industries and started to be famous.  The pattern sample of the earliest stainless-steel sample plate is horizontal and vertical stripes crisscrossed, inside the subsequent 20-30 years researchers through non-stop experiments and improvements to have a higher anti-skid sample design is now additionally big-scale produ

Chrome steel pattern plate is embossed via manner of mechanical system on the stainless steel plate, just so the ground of the concave and convex pattern.  Because of the great corrosion resistance and skid resistance of stainless steel sample plate has been utilized by many industries and started out to be famous.  The pattern pattern of the earliest stainless steel pattern plate is horizontal and vertical stripes crisscrossed, inside the next 20-30 years researchers via non-stop experiments and improvements to have a better anti-skid pattern layout is now moreover huge-sc

316L Super Austenitic Stainless Steel316L Super Austenitic Stainless Steel  Scope of application:Corrosion resistance, atmospheric corrosion resistance and high temperature strength are particularly good, which can be used in harsh conditions; Excellent work hardening (non-magnetic).

Stainless-steel pattern plate is embossed thru way of mechanical gadget at the stainless-steel plate, in order that the floor of the concave and convex sample.  Because of the splendid corrosion resistance and skid resistance of stainless steel sample plate has been used by many industries and started out to be well-known.  The pattern sample of the earliest stainless-steel sample plate is horizontal and vertical stripes crisscrossed, within the subsequent 20-30 years researchers through non-stop experiments and improvements to have a better anti-skid pattern layout is now

slip on flange ASME B16.5 ss304L ss316L flanges plate flangeItemDescriptionBasic InformationMaterial GradeWP304 , WP304L , WP304H , WP316 , WP316L , WP316Ti , WP309S , WP310S , WP321 , WP321H , WP347 , WP347H , F304 , F304L , F304H , F316 , F316L , F310S , F321 etcSize1/2" to 48" Sch 5S to XXSStandardASTM A403 etc .Process MethodForged / CastingIndustry & AdvantageApplicationa) Connect pipesAdvantagea) High technology ; good surface ; high quality etcTerms & ConditionsPrice ItemFOB , CFR , CIF or as negotiationPaymentT / T , LC or as negotiationDelivery Time 30 work

ASTM A182 F11 F22 F5 F304 F316L F53 Stainless Steel Duplex Stainless Steel Slip on Flange So RF Flange Weld Neck Flange Blind FlangeItemDescriptionBasic InformationMaterial GradeWP304 , WP304L , WP304H , WP316 , WP316L , WP316Ti , WP309S , WP310S , WP321 , WP321H , WP347 , WP347H , F304 , F304L , F304H , F316 , F316L , F310S , F321 etcSize1/2" to 48" Sch 5S to XXSStandardASTM A403 etc .Process MethodForged / CastingIndustry & AdvantageApplicationa) Connect pipesAdvantagea) High technology ; good surface ; high quality etcTerms & ConditionsPrice ItemFOB , CFR , CIF or as

Stainless Steel 317 Square Bars & Rods have excellent yield strength and tensile strength, which is suitable for cold working and annealed condition appliance. It has nickel and low carbon content to provide high formability and excellent corrosion resistance to alkaline compounds. SS 317 Bars & Rods is austenitic stainless steel non-magnetic in nature, less conductivity to electricity, and less brittle at low temperature.

Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked.

Alloy B-2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulphuric, acetic and phosphoric acids. Hastelloy® B-2 provides resistance to pure sulphuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Austenitic stainless steel refers to stainless steel with an austenitic structure at room temperature. When the steel contains about 18% Cr, 8%-25% Ni, and about 0.1% C, it has a stable austenite structure. Austenitic chromium-nickel stainless steel includes the famous 18Cr-8Ni steel and the high Cr-Ni series steel developed by adding Cr and Ni content and adding Mo, Cu, Si, Nb, Ti and other elements on this basis. Austenitic stainless steel is non-magnetic and has high toughness and plasticity, but its strength is low. It is impossible to strengthen it through phase transformation.

Corrosion resistance of Incoloy 800H:800H is resistant to many corrosive media. Its high nickel content gives it good resistance to stress corrosion cracking in aqueous corrosion conditions. The high chromium content gives it better resistance to pitting and crevice corrosion cracking. The alloy has good resistance to nitric and organic acid corrosion, but has limited resistance in sulfuric and hydrochloric acids. It has good resistance to corrosion in oxidizing and non-oxidizing salts, except for the possibility of pitting corrosion in halides.

Alloy Inconel 625 is a low-carbon nickel-chromium-molybdenum alloy with excellent breadability to various corrosive media, non-magnetic; good strength, toughness and excellent fatigue resistance in environments ranging from low temperatures to 1093°C (2000°F), thanks to the low carbon content and solid solution treatmentTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy:

The Incoloy 800HT is resistant to many corrosive media. Its high nickel content makes it have good resistance to stress corrosion cracking under water-based corrosion conditions. High chromium content makes it have better resistance to spot corrosion and crevice corrosion cracking. The alloy has good resistance to nitric acid and organic acid, but limited resistance to sulfuric acid and hydrochloric acid. Excellent corrosion resistance in oxidizing and non-oxidizing salts, except for the possibility of point corrosion in halides.

430 stainless steel has oxidation resistance to corrosion, but has a tendency to intergranular corrosion.430 stainless steel wire is widely used in axis.Because it is safe and non-toxic, it is widely used in food tableware.Product Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582,ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc.SpecificationsRound barDiameter:0.1~500mmAngle barSize: 0.5mm*4mm*4mm~20m

The 347H hexagonal bar is a stable stainless steel whose main advantage is excellent intergranular corrosion resistance when exposed to chromium carbide precipitation temperatures from 800°F to 1500°F(427°C to 816°C).Product Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582,ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc.SpecificationsRound barDiameter:0.1~500mmAngle barSize: 0.5mm*4mm*4mm~20mm*400m

2Cr13 stainless steel has high hardness and good corrosion resistance during quenching. Many of them are used for cutting tools. They are "cutting tool grade" martensitic steel.

2304 Duplex Stainless Steel PlateDuplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless metal whose shape is a stability of ferritic and austenitic. It has common corrosion resistance comparable or higher than Alloys 304L and 316L however with yield energy almost double that of austenitic stainless steels.

LDX 2101* is a duplex (austenitic-ferritic) stainless steel with relatively low contents of alloying elements. The grade has high mechanical strength, similar to that of other duplex grades. Its good corrosion resistance is on par with that of most standard stainless steel grades.