3.5mm Thickness-manufacture,factory,supplier from China

There are a lot of products in life are made of stainless steel, and what are the thickness of stainless steel plate?Stainless steel has different classification, such as some cold rolled model, its thickness is large and small, such as the thinner is 0.3-0.7 mm, slightly thicker  reached 1.0, 1.2, 1.5 mm, and some thicker is 2.0, 2.5, 3.0 mm.

The specification of the pattern plateIn fact, its specifications are mainly composed of thickness and width.

How to identify the quality of stainless steel sinks?1. Thickness of water tank steel plate: The high-quality water tank adopts imported 304 stainless steel plate with a thickness of 1mm, while the ordinary low-grade water tank adopts 0.5mm-0.7mm. The method of identification can be determined from the weight and whether the surface is flat.2. Anti-noise treatment: The bottom of the high-quality sink is sprayed or glued with rubber sheets and does not fall off, which can reduce the sound caused by the impact of the water from the faucet on the bottom of the basin, and play a buffering role.3.

Advantages of thin-walled 90-degree elbows: excellent wear resistance and continuous use.90° elbows are suitable for piping systems in petroleum, natural gas, chemical, hydropower, construction and boiler industries.The straight seam elbow with any large diameter and relatively thin wall thickness can be obtained by the casting process. The manufacturing cycle can be shortened and the production cost can be greatly reduced. Because it does not require any special equipment, it is especially suitable for on-site processing of large straight seam elbows.

Production process:Stainless steel checker plate is divided into two categories:One is rolled by a rolling mill in the production of stainless steel by a steel mill. The thickness of this type of product is about 3-6mm, and it is in the state of annealing and pickling after hot rolling.

Stainless Steel TubeFormWelded and Seamless.TypeFluid, Food, Decorative & Structural.Round Tube (mm)4.76 OD to 203.2 OD.Spiral welded (mm)76.2 OD to 1016 OD.Square (mm)12.7 to 150 A/F.Rectangular (mm)12.7 x 25.4 to 200 x 100.Grades304/304L & 316/316L.Wall Thickness (mm)0.7 to 6.0ProcessingCut-to-length & polishing.The information provided is for standard stock product and does not encapsulate all available combinations.

Stainless steel plate is a thick steel plate with a thickness of less than 4mm after further cold rolling according to the hot rolled steel of general carbon steel. Harm caused by material plate to steel coil manufacturing: one of the key elements in the design scheme of four roll rolling machine is material plate.The spot heating in stainless steel plate is mainly used to correct the convex and concave deformation of thick plate. The heat treatment method of stainless steel plate will soon be called flame correction.

The download below provides detail of size range and thickness within the grades.Stainless Steel Channel BarStandardASTM A276.ConditionHRAP.Size Range (mm)Base: 80 to 150.Side: 40 to 75.Thickness (mm)5 to 6 (depending on size).Grades304 & 316.ProcessingBar cutting.

Stainless steel coil: Material: SUS201, 202, 304, 316L, 316Ti, 321, 304L, 441, 444, 436, 439, 430, 409L, 410S, 309S, 310S, 904L, 2205, 2507, etc.  Thickness: 0.3-16.0mm, width 1 meter, 1.22 meters, 1.5 meters, 1.8 meters, 2 meters, non-standard can be customized.   Stainless steel properties:As a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties;  Stamping, bending and other hot workability, no heat treatment hardening phenomenon (use temperature -196℃~800℃).  Household products (cl

Cold rolled 316 stainless steel sheet 304 ss plate stainless steel plateOur stainless steel sheet come in a variety of thickness and tolerances.Moreover, we can supply stainless steel sheet of various materials such as 201 304 316 316l 310s 904l 2205 2507 and etc.Stainless steel sheet and stainless steel plate are both a peProduct Name:Cold rolled 316 stainless steel sheet 304 ss plate stainless steel plateThickness:0.1-300mmWidth :1000-4000mm,etcLength:2000mm, 2438mm, 3000mm, 3500,6000mm,12000mm,or rolled,etc etcStandard:ASTM,AISI,JIS,GB, DIN,ENTechnique:Cold Rolled, Hot Rolled